Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in West Valley City?
Spring replacement in West Valley City typically costs $180 – $340 for a single torsion spring. Most homes have two springs that are replaced together, which puts a matched pair at roughly $360 – $680. Those are estimated ranges for the West Valley City market in 2026, and the written estimate we provide after we see your door sets the final price.
We work on the brand you already have, from LiftMaster and Chamberlain openers to Clopay, Amarr, Wayne Dalton and Raynor doors, so the technician who arrives already knows the hardware on your garage. Garage doors are all we do, and a spring job is one of the most common calls we take. Call (844) 834-4689 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A single spring runs $180 – $340; a matched pair is about twice that.
- A snapped spring is a safety issue, so stop using the door and have it looked at.
- Most spring jobs are completed in a single visit once the right spring is matched.
- Estimates are free and upfront, and the written estimate is the price.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work usually breaks down for a home in West Valley City. These are typical estimated ranges, not exact quotes, and the written estimate you get after we look at your door is the number that counts.
| Item | Typical Estimated Range |
|---|---|
| Torsion spring replacement (one spring) | $180 – $340 |
| Torsion spring replacement (matched pair) | $360 – $680 |
| Extension spring replacement (per side) | $180 – $340 |
| Spring replacement when a cable is also damaged | Cable repair adds $130 – $250 |
| Spring work bundled with a roller or track fix | Roller replacement adds $110 – $220; track realignment adds $120 – $240 |
| General garage door repair (springs included, wider scope) | $150 – $600 |
A matched pair costs about twice the single-spring range because both springs are replaced together, not one at a time. When one torsion spring breaks, the second has usually been carrying the same load for the same years, so replacing them as a set keeps the door balanced and avoids a second service call a few months later.
What pushes the price toward the top of a range: heavier doors, high-lift or unusual track setups, a cable that’s also frayed, or a spring that has to be custom-ordered for an older door. What keeps it near the bottom: a standard two-car door with a single broken spring, a clean install surface, and no secondary damage.
What Affects Spring Replacement Pricing in West Valley City
Spring pricing is rarely one flat number. A few things move the estimate up or down, and most of them come down to the door itself rather than anything about your home’s location.
- One spring or two. A single torsion spring costs less than a matched pair because fewer parts and less labor are involved. We’ll tell you which setup you have before we quote.
- Spring type and size. Torsion springs and extension springs are priced and installed differently. Torsion springs sit above the door on a shaft; extension springs run along the sides. The size has to match the door’s weight, so the right spring matters more than the cheapest one.
- Door weight and height. A taller or heavier door (an insulated double-car door, for example) needs a stronger spring, which can sit at the higher end of the range.
- Condition of cables, rollers and tracks. If a cable is worn or a roller is seized, replacing the spring alone won’t fix a door that still binds. Cables run $130 – $250, rollers $110 – $220, and track realignment $120 – $240, added on top of the spring if they need attention.
- Brand and hardware. We’re certified across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, so we arrive familiar with the exact hardware on the job. Custom or older hardware can take longer to match, which shows up in the estimate.
- Whether other repair is needed. Sometimes the spring is the visible failure and something else is close behind it. A fuller repair scope can run up to $600, so we quote the whole picture rather than surprise you later.
Why Springs Fail Here, and Why That Matters for Cost
Springs wear out on cycle count, not calendar years. Every open and close adds up. A household that runs the door several times a day wears a spring faster than one that uses it a few times a week, and West Valley City households are no different: a two-car garage with a daily commute and kids coming and going tends to push spring life toward the shorter side.
The other factor is installation quality. A spring matched to the wrong door weight will fatigue early and can even break within its first stretch of use. That’s why we match the spring to the door rather than grabbing whatever fits the shaft. It’s also why a slightly higher upfront estimate for the correct spring usually saves money over replacing a cheap one twice.
How to Save on Spring Replacement
You don’t need to chase the cheapest quote to keep the cost down. A few practical moves keep the job in a sensible range without cutting corners on a part that holds real tension.
- Replace the pair, not the single. Replacing one spring when the other is equally worn means a second visit and a second labor charge soon after. A matched pair at roughly twice the single-spring range usually costs less over the life of the door than two separate single jobs.
- Get a written estimate before work starts. The written estimate sets the final price, so there’s no moving target. Our estimates are free, so ask for the number in writing and compare it fairly, item by item.
- Bundle related wear. If rollers are seized or a cable is frayed, fixing them in the same visit avoids paying for a separate trip later. Roller replacement is $110 – $220 and cable repair is $130 – $250, and both are cheaper to combine with a spring job than to schedule alone.
- Don’t wait for a second failure. A door running on one spring is unbalanced and leans harder on the opener. Catching the problem early keeps the cost on the lower end of the spring range.
- Ask about the right spring for the door. A correct, weight-matched spring lasts longer than a generic one, which is the quiet way to save over time.
Call (844) 834-4689 for a free estimate and we’ll walk you through what your door needs. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace? A Quick Guide
Most of the time, a broken spring is a repair, not a reason for a new door. If the panels, tracks and opener are sound, replacing the springs gets you back to a normal door for $180 – $340 per spring. If the door is dented, the panels are separating, or the opener is failing at the same time, a fuller repair can reach $600, and a new door installation runs $700 – $2200. Panel replacement alone is $250 – $500 when the rest of the door is fine.
Our advice is the same either way: get the door looked at before deciding. A technician who only works on garage doors can tell you quickly whether the spring is the whole story or just the first symptom. Our technicians have up to 9 years of experience, and they arrive knowing the brand of door and opener in front of them.
What Happens When You Call
When you call about a broken spring, we ask a few questions: the type of door, roughly how old it is, whether it’s a one-car or two-car door, and whether the door is stuck up or down. That helps us match the right spring before the visit. A technician comes out, confirms the spring setup, checks the cables and rollers, and gives you a written estimate. Most standard spring jobs are done in a single visit once the spring is matched.
If a call comes in outside our dispatch window, we book it into the next opening, Sunday through Friday, 7am to 7pm. We answer 24/7, so you won’t be left guessing when you’ll hear back.
Spring Safety: Why We Tell You to Stop Using the Door
Torsion springs and their cables are under extreme tension. A spring that has snapped, or one that’s visibly stretched or separated, can release stored energy suddenly, and the cables that run with it can whip. This is genuinely dangerous hardware. Please don’t try to unwind, cut or replace a torsion spring or cable yourself, and keep the door down and the opener disconnected until a trained technician has looked at it. We’d rather you call and wait than risk an injury. It’s the same reason we don’t walk homeowners through spring replacement step by step. Some jobs are worth learning and this isn’t one of them.
Why a Specialist Handles This Better
Spring replacement is a narrow job done well by people who do it all day. Garage doors are all we do, and every technician, every tool and every part on the job is specific to garage doors rather than split across plumbing, HVAC or general contracting. We’re certified across eight major garage door and opener brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That means same-system expertise on every visit, and we can also help if the spring failure has you thinking about opener repair or a full new door.
You can read more about the company on the Auburn Garage Door Service home page and see how we cover the area on our West Valley City page.
FAQs – Spring Replacement Cost
How much does spring replacement cost in West Valley City?
Spring replacement in West Valley City typically costs $180 – $340 for a single spring, or roughly $360 – $680 for a matched pair. The written estimate sets the final price, and it’s free. Call (844) 834-4689 for an exact quote.
Is it cheaper to replace one spring or both?
Both, in most cases. A single spring is $180 – $340, but replacing just one when the other is equally worn tends to mean a second service call soon after, so the pair usually costs less over time. Call (844) 834-4689 and we’ll tell you which setup you have.
How much does a broken garage door spring repair cost?
A broken spring repair is the same job as spring replacement and falls in the $180 – $340 range per spring, or about twice that for a pair. If a cable or roller is also damaged, add $130 – $250 for the cable or $110 – $220 for rollers. Call (844) 834-4689 for a free estimate.
Can you come today?
Often, yes. Same-day service is available, with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, so call (844) 834-4689 and we’ll book the soonest opening.
Do I need to replace cables or rollers at the same time?
Only if they’re worn. A spring-only job stays at $180 – $340 per spring. Cable repair adds $130 – $250 and roller replacement adds $110 – $220, but we only recommend them when the parts are actually failing. Call (844) 834-4689 for a quote that covers just what your door needs.
Is it cheaper to repair a door or replace it?
Repair is usually cheaper. Spring replacement runs $180 – $340 per spring, while a new door installation runs $700 – $2200. Repair keeps you at the lower end unless the panels or tracks are also failing. Call (844) 834-4689 for a free estimate and an honest recommendation.
Get a Free Spring Estimate Today
If a spring has snapped or your door feels heavier than it used to, get it looked at before it damages the opener or the door. We serve homeowners across West Valley City with free estimates, upfront pricing and a single-trade focus on garage doors. Call (844) 834-4689. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the West Valley City market as of 2026. Auburn Garage Door Service offers free estimates. Call (844) 834-4689.
Written by the team at Auburn Garage Door Service.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Miguel Vargas"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Steve Hoffman"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Chris Hayes